Ambro-Sol Chrome Zinc Spray 400ml
- Single-component cold galvanizer
- Ideal for finishing where a shiny and mirror-like surface is required
- Good resistance against weathering
- Dry to touch in 30 mins *
* see technical data sheet for full details.
Ambro-Sol Chrome Zinc Spray 400ml is a single-component cold galvanizer formulated with synthetic resins and aluminium.
It protects metallic surfaces against oxidation, and can help repair damaged surfaces, leaving a chrome finish. It leaves a resistant and protective coat.
It is particularly light-coloured and shiny - ideal for where a shiny, mirror-like surface is required.
Ambro-Sol Chrome Zinc Spray provides good resistance against weathering.
Ambro-Sol Chrome Zinc Spray dyring times at 20°C:
Out dust: 15 minutes
Dry to touch: 30 minutes
Dry in depth: 12 hours
Application areas for the Ambro-Sol Chrome Zinc Spray 400 ml includes all galvanized parts, gates, gutters, etc. Even on coarse iron surfaces that must be protected and given a particularly bright shine. Suitable for retouching the galvanized/ electrolyte zinc.
It can be used on metal surfaces such as iron, aluminium and steel. It protects ferrous metal structures, pipes, gutters, fences, tools etc.
How to use:
Clean the surface to be treated to remove dirty and rust using synthetic thinner.
If necessary, sand with fine sandpaper.
Turn the bottle and shake it well until you hear the marbles move freely inside the can.
Spray the product on the surface to be treated and then proceed with painting if desired.
To prevent dripping, apply two thin coats at a distance from the support of about 8-10 inches.
After use, spray for 2/3 seconds with the bottle upside down to avoid blocks in the dispenser.